Sorry, but the W-Sub 37 workboat listing has already been removed.
Get an email notification when another vessel like this is listed
We also have the following similar vessels currently advertised:
1021BSB 1992 WORK BOAT 26.50 m Work Boat For Sale & Charter
FROM DIRECT OWNERS
CARGO AND TANKS CAPACITIES
Deck Area (m2) 65 m2
Type Antipollution Rec Oil, SPS code, 26 technical.
Possibility to operate as tug boat.
Machinery propulsion: possibility to install a third engine.
International Special Nav up to 50 nm
Height to deck: 2.40 m
Minimun draft: 1.25
GRT: 73 - NRT: 21
Minimun safe manning: 2
Pr... read more
1928 26'6" x 8' x 3.6' Steel Replica Tugboat
27' tugboat replica
Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water.
All supporting and historical documents will be supplied to buyer at time of sale.
Original boat is constructed of 1/4" steel
Original hull is galvanized at waterline
Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate
Original hull is riveted and was built in Scotland in 1928
NO rust or weak spots and NO leaks.
26'6" x 8'... read more
|Length:|| 26' 6"|
|Location:||Massachusetts Massachusetts USA|
Length 14.6m. Beam 7.32m. Draught 1m
This is a unique and versatile aluminium work boat.
The rear deck can be completely removed to create a moon pool of 6m x 3.5m between the hulls, alternatively the centre section can be slid under the wheel house to create a moon pool directly under the gantry winch. In addition the rear roller can be removed to enable unrestricted access from the stern - ideal for something like an Autonomous Surface Vessel (ASV).
Good sized crane: HIAB 071AW crane,1000kg at 6.9m, 2000 kg at 3.35m
Overhead Gantry. This is fitted with a large winch originally r... read more
|Location:||Buckie Aberdeenshire UK|
1993 26' x 11' x 3.5' Steel Twin Screw Work/Tow Boat
9 gross tons
2 x 4-53 Detroits with low hrs
Propellers: 24" x 24", 4 blade props
Cruising speed: 16 kts
Maximum speed: 18 kts
200 gal fuel capacity. Twin 100 gal tanks, Duplex Raycor 1000 filters
Electronics: Raytheon Radar, Depth Sounder, VHF
Running and tow lights
Originally was used to move a 110' x 30' barge with 40 ton crane
Located in New York State
Price recently reduced to $60,900 USD
Scruton Marine Services - File No. W2188
Detail are deemed to be corr... read more
|Location:||New York State USA|
13.47m Safehaven Interceptor For sale... read more
|Price:|| £195,000 Ex. Tax|
33' X 10' Workboat With Winch
Fitted with a winch
Located in Quebec
Price: $13,250 CDN... read more
689-BSB GRP ANTIPOLLUTION & SOLID WASTE CLEANING BOAT FOR SALE
- FROM DIRECT OWNERS -
Designed for the collection of solid floating waste in port
Reported to have few working hours and kept in good condition
Its easy to transport due to its short measures and low weight
She has a powerful water pressure system which can be used for
cleaning rocks and waters and also a... read more
|Location:||SOUTH OF EUROPE Spain|
New 19′ x 8′ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $25,000 CDN
Fully welded 3/16″ aluminum hull
Rated for 90hp
Self bailing floor/sole drains overboard
Large waterproof storage areas in bow and sides and covered battery storage in transom
Waterproof breaker panel
LED nav lights
Built in fuel tank with gauge
Capacity 5 people
Custom options available
Location: Western Canada
File ref W2394... read more
New 15′ x 68″ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $6,500 CDN
Fully welded 3/16″ aluminum hull
Capacity 2-4 people
Options available: custom lighting and power for electronics, mounts for fish finders and trolling motors, flat floor/sole, non-skid coatings on sole and stepping surfaces, removable seats or cushions, extended bow deck and storage compartment, other custom options available!
Location: Western Canada
File Ref W2393... read more
The AG 480 Enduro is a rugged, strong but light and practical workboat with a half deck, thwart seating and full-length guard rails. Ample stowage space can be found under the bow plate and in the stern jump seat boxes. This boat can be operated with a tiller arm outboard or just as easily with a set of paddles. Seat cushioning and folding canopy are optional.... read more
2020 24’6″ x 9′ Steel Work Boat w/ Wheelhouse - New Build
•Price: $22,000 CDN
Motor may be available at additional cost
•Boat is 9′ wide at max, 8′ wide deck
•15′ of deck ahead of wheelhouse
•4″ pipe side cap
•(2) 4″ spud pockets aft
•10 gauge construction
•Light freeboard 9″ forward, 5″ aft
•6’8″ headroom in wheelhouse
•Located in Port Dover
File Ref W2383... read more
|Length:|| 24' 6"|
|Location:||Port Dover Ontario Canada|
1985 21' x 8' Aluminum Work Boat w/Trailer
◦New Price: $37,500 CDN, reasonable offers considered
◦Shell plate thickness: 1/4" bottom, 3/16" sides and deck and pilothouse
◦Powered by: Volvo Penta AD41P-A, (2014), 200 hp
◦Fuel capacity: 200 litres
◦Volvo Duo Prop
◦Other: Ritchie compass, cable steering, 2+ manual bilge pumps, Webasto AT2000D heater
◦Boat is in good overall condition
File W2387... read more
Icebreaking steel in very good condition.
117 BRT 36 NET
150 ton payload.... read more
UXO survey Catamaran especially equipped for shallow water Magneto-survey (depth 0.80 - 15 meters)
Regular Survey until 200 metres deep.
Our special developed magneto recording scanner frame is unique and one of a kind
( it measures 6 meters wide with a max recording speed of 12 kilometers per hour)... read more
|Location:||Den Helder Noord-Holland Netherlands|
LOA: 8.85 m
Beam: 2.94 m
Draft: 0.71 m
Hull / Keel: Displacement
Engine(s) & Electrical:
Yanmar 4JH3-DTE, 92KW diesel. Maximum speed: 11kts. Range: approx. 80NM. Hydraulic steering. Single battery charged from the engine. Shore power. 230v inverter.
Accommodation & Below Deck:
Single berth in the wheelhouse, standing headroom, plywood flooring, chart table.
Deck & Canvas:
Aluminium bow rail & side rail, 2 anchors, anchor win... read more
The MMS Guardian is a 10 metre workboat built by MMS within our own shipyard facility. The vessel is constructed to the MCA workboat code of practice and can operate up to category 3 regulations (Up to 20 nautical miles from a safe haven). This vessel can be utilized to carry out a number of different tasks such as; Safety stand-by, line handling, survey operations, pushing, light towing (2.2 Tonne bollard pull) marine civil engineering support and any other general workboat duties as required.
The MMS Guardian is road transportable.
The vessel is equipped with the following:
• D... read more
|Location:||Hull Humberside UK|
Offshore Aluminium Vessel for survay, sonar, multibeam and magnetometer work. Built 1984 for german coastgard,
remake for survay 2013. Moonpool and a frame. 6 Pax and 2 shake-down.
Year of construction. 1984
Ship name M/S Terra 1
Ship type Survay vessel
Call sign exist
MMSI Nr. exist
Gross Tonnage 14 T
Overall Length 13,10 m
Overall Breadth 3,80 m
Draught 1,0 m
Year of Construction 1984 / 2013
Flag and Homeport Deutsch
Engine Type 2 x MAN
Engine Power... read more
|Location:||Bremerhaven Niedersachsen Germany|
|Price:|| €72,500 Tax Paid|
The MMS Humber Engineer is a 22 metre workboat re-built by MMS within our own shipyard facility. The vessel is constructed to the MCA workboat code of practice and can operate up to category 3 regulations (20 nautical miles from a safe haven).
Capable of being utilized to carry out a number of different tasks such as; Dive support, survey operations, cable & pipe repair, dock cleaning, maintenance & repair, dredging, project mobilization, equipment transport, salvage operations, marine civil engineering support and any other general workboat duties as required. This vessel is ideal... read more
|Location:||Hartlepool Durham UK|
15m long 4.5m wide 1.2m draught.
excellent little safety/ survey vessel
180hp main engine
15kva gen set
large wheel house... read more